Route from Rossendale to Halton

The distance between Rossendale and Halton is 45 miles. Travel time is 51 minutes.

From: Rossendale, County: Lancashire, England
To: Halton, County: Cheshire, England
45 mi , 51 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Rossendale to Halton on map



Driving directions from Rossendale to Halton

45 mi 51 min
1.
Head southeast on Joe Connolly Way
114 ft
2.
Turn left to stay on Joe Connolly Way
122 ft
3.
Turn right to stay on Joe Connolly Way
188 ft
4.
Turn left onto Schofield Street
299 ft
5.
Turn right onto Burnley Road East (B6238)
480 ft
6.
Turn right onto Bacup Road (A681)
1.1 mi
7.
Enter the roundabout and take the 1st exit onto Bocholt Way (A681)
10 ft
8.
Exit the roundabout onto Bocholt Way (A681)
0.6 mi
9.
Enter Queen's Square Island and take the 2nd exit onto A682
100 ft
10.
Exit the roundabout onto A682
0.4 mi
11.
Enter the roundabout and take the 2nd exit onto A682
122 ft
12.
Exit the roundabout onto A682
0.8 mi
13.
Merge left onto A56
1.5 mi
14.
Continue onto M66
8.4 mi
15.
Take the ramp on the left towards M60: Ring Road
747 ft
16.
Keep right towards M60: Ring Road
563 ft
17.
Enter Simister Island and take the 3rd exit towards M62
982 ft
18.
Exit the roundabout towards M62
0.3 mi
19.
Continue onto M60
6.9 mi
20.
Take the ramp on the left towards M62
644 ft
21.
Keep right towards M62
16.7 mi
22.
Take the ramp on the left
0.6 mi
23.
Enter Rainhill Stoops Interchange and take the 2nd exit onto Watkinson Way (A557)
388 ft
24.
Exit the roundabout onto Watkinson Way (A557)
3.2 mi
25.
Enter Waterfront Roundabout and take the 3rd exit onto Ashley Way (A557)
533 ft
26.
Exit the roundabout onto Ashley Way (A557)
1035 ft
27.
Go straight onto Queensway (A557)
0.4 mi
28.
Take the ramp on the left onto Mersey Gateway
0.4 mi
29.
Merge right onto Mersey Gateway Bridge (A533)
1.3 mi
30.
Take the ramp on the left towards A558
0.3 mi
31.
Enter Bridgewater Interchange and take the 2nd exit
310 ft
32.
Exit the roundabout
484 ft
33.
Keep left at the fork
998 ft
34.
Turn left onto Halton Brow
0.4 mi
35.
Turn left onto The Underway
1302 ft
36.
Make a sharp right onto Castle Road
208 ft
37.
Turn left
118 ft
38.
You have arrived at your destination, on the right
0 ft


How much does it cost to drive from Rossendale to Halton with petrol?

Driving from Rossendale to Halton costs £7.9 with petrol. The calculation assumes a petrol price of 144 pence per liter and a car's petrol consumption of 37.5 miles per gallon. Carpooling with two passengers brings the cost down to £3.95 per person. With three passengers, it's £2.63 per person, and with four passengers, it's £1.98 per person. The fuel cost for the trip is derived from the distance and car fuel consumption, totaling 5.5 liters of fuel. This results in a £7.9 fuel cost for the journey.
 

Diesel cost from Rossendale to Halton.

The trip with diesel fuel costs 5.4 £ (167p/lt, 62.7 mpg).
For 2 passengers: 2.7 £ (5.4/2) /p.
For 3 passengers: 1.8 £ (5.4/3) /p.
For 4 passengers: 1.35 £ (5.4/4) /p.

One key factor contributing to diesel cars generally having lower fuel consumption than petrol cars is their higher thermal efficiency. Diesel engines typically operate at higher compression ratios than petrol engines, allowing them to extract more energy from each unit of fuel. This increased efficiency means diesel vehicles can travel farther on the same amount of fuel compared to petrol vehicles, resulting in lower fuel consumption overall.

Alternative routes from Rossendale to Halton

The most time-consuming route from Rossendale to Halton spans a distance of 40.77 miles and requires a travel time of 1 hour and 13 minutes.

Which is the cheapest route from Rossendale to Halton by car?

The cheapest route from Rossendale to Halton is the second suggested route (40.8mi, 1h 13min) and costs 7.1 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Rossendale to Halton is the first suggested route (45mi, 51min) and costs 7.9 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Rossendale to Halton?

There are two suggested routes. The fastest route is 45mi (distance from Rossendale to Halton) and its duration is 51min. The slowest route is 40.8mi, and its duration is 1h 13min.

RouteCalculator provides you with the information to prepare your trip from Rossendale to Halton by car or motorbike. It offers you alternative road routes that you can follow to go from Rossendale to Halton. It provides driving directions from Rossendale to Halton, i.e. where to turn and when, distance of the Rossendale - Halton route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Rossendale to Halton with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Rossendale located?

Rossendale is located in Lancashire county and in England. It is situated at an altitude of 209 meters above sea level. Rossendale has coordinates 53.6940302o,-2.2559579o. RouteCalculator provides a map of Rossendale from which you can plan your trips to other UK cities.

What is the location of Halton?

Halton is located in Cheshire county and in England. It is situated at an altitude of 92 meters above sea level. Halton has coordinates 53.3317210o,-2.6958220o. RouteCalculator provides a map of Halton from which you can plan your trips to other UK cities.