Route from Sandwell to Richmond upon Thames
The distance between Sandwell and Richmond upon Thames is 129 miles. Travel time is 2 hours and 18 minutes.
Driving directions from Sandwell to Richmond upon Thames
How much does it cost to drive from Sandwell to Richmond upon Thames?
If you're using petrol, it's gonna set you back 22.3 quid. In this calculation, they're saying the petrol price is 143 pence per liter, and the car's gonna guzzle down 37.5 miles for every gallon of that stuff.
Now, if you're carpooling, the cost gets split up between everyone riding. So, if there are two people in the car, it's gonna be 11.15 quid each (£22.3 divided by 2). With three buddies on board, it works out to around 7.43 quid per person (£22.3 divided by 3). And if you've got a full car with four people, it's only 5.58 quid per person (£22.3 divided by 4).
Breaking down the numbers, the fuel cost is calculated based on how far you're going and how much gas your car chugs. For this trip, you're gonna need about 15.6 liters of fuel. They figured that out by dividing the distance of 128.81 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting that to liters 'cause, you know, the UK uses liters.
So, you take the fuel needed, which is 15.6 liters, and you multiply it by the price per liter, which is 143 pence. And voilà, you got yourself the total fuel cost for the trip from Sandwell to Richmond upon Thames: 22.3 quid.
Diesel cost from Sandwell to Richmond upon Thames.
The trip with diesel fuel costs 14.1 £ (151p/lt, 62.7 mpg).
For 2 passengers: 7.05 £ (14.1/2) /p.
For 3 passengers: 4.7 £ (14.1/3) /p.
For 4 passengers: 3.53 £ (14.1/4) /p.
When compared to petrol engines, diesel engines typically have a lower fuel usage. This is the case even when all other factors remain the same. This is mostly attributable to the higher energy density of diesel fuel as well as the higher thermal efficiency of diesel engines. Diesel engines are often more efficient in converting the energy contained in diesel fuel into mechanical effort than gasoline engines are. Diesel fuel contains more energy per litre than gasoline fuel.
In addition, diesel engines carry out their operations at higher compression ratios, which not only enhances their thermal efficiency but also enables them to extract a greater amount of energy from each individual unit of fuel. As a consequence of this, diesel vehicles typically achieve superior fuel economy and are able to go further on a gallon or litre of fuel when compared to gasoline vehicles of comparable size and performance.
In the end, the decision between diesel and gasoline-powered vehicles is determined by a number of criteria, such as preferences about fuel economy, driving patterns, environmental concerns, as well as the availability and pricing of fuel in the local area.
Alternative routes from Sandwell to Richmond upon Thames
The second route from Sandwell to the Richmond upon Thames is 128.27 miles and takes 2 hours and 19 minutes.
The third route from Sandwell to the Richmond upon Thames is 126.99 miles and takes 3 hours and .
Which is the cheapest route from Sandwell to Richmond upon Thames by car?
The cheapest route from Sandwell to Richmond upon Thames is the third suggested route (127mi, 3h ) and costs 22 £ (petrol fuel cost, 143p/lt, 37.5mpg).
The second cheapest route from Sandwell to Richmond upon Thames is the second suggested route (128mi, 2h 19min) and costs 22.2 £.
The most expensive route from Sandwell to Richmond upon Thames is the first suggested route (129mi, 2h 18min) and costs 22.3 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Sandwell to Richmond upon Thames?
There are three suggested routes. The fastest route is 129mi (distance from Sandwell to Richmond upon Thames) and its duration is 2h 18min. The other route is 128mi, and its duration is 2h 19min. The slowest route is 127mi, and its duration is 3h .
RouteCalculator provides you with the information to prepare your trip from Sandwell to Richmond upon Thames by car or motorbike. It offers you alternative road routes that you can follow to go from Sandwell to Richmond upon Thames. It provides driving directions from Sandwell to Richmond upon Thames, i.e. where to turn and when, distance of the Sandwell - Richmond upon Thames route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Sandwell to Richmond upon Thames with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Sandwell located?
Sandwell is located in West Midlands county and in England. It is situated at an altitude of 158 meters above sea level. Sandwell has coordinates 52.5361674o,-2.0107930o. RouteCalculator provides a map of Sandwell from which you can plan your trips to other UK cities.
What is the location of Richmond upon Thames?
Richmond upon Thames is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Richmond upon Thames has coordinates 51.4613110o,-0.3037420o. RouteCalculator provides a map of Richmond upon Thames from which you can plan your trips to other UK cities.
- Route from Sandwell to Richmondshire
- Distance from Sandwell to Rochdale
- Route from Sandwell to Rochford
- Distance from Sandwell to Rossendale
- Miles from Sandwell to Rother
- How far is from Sandwell to Rotherham
- Route from Sandwell to Rugby
- Distance from Sandwell to Runnymede
- Distance from Sandwell to Rushcliffe