Route from Tameside to Broxbourne
The distance between Tameside and Broxbourne is 202 miles. Travel time is 3 hours and 26 minutes.
To: Broxbourne, County: Hertfordshire, EnglandDriving directions from Tameside to Broxbourne
How much does it cost to drive from Tameside to Broxbourne with petrol?
Let's delve into the expenses of a road trip from Tameside to Broxbourne. The journey using petrol will set you back 35.3 pounds. Now, let's walk through how we arrived at this figure.
Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.
Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 17.65 pounds (£35.3 divided by 2). With three passengers, the cost per person drops to around 11.77 pounds (£35.3 divided by 3). And if there are four passengers onboard, each person chips in 8.83 pounds (£35.3 divided by 4).
Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Tameside and Broxbourne is approximately 202.18 miles. So, to cover this distance, the car will require roughly 24.5 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.
Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (24.5 liters) by the price per liter (144 pence) yields 35.3 pounds. Therefore, the fuel cost for the journey from Tameside to Broxbourne is 35.3 pounds.
Diesel cost from Tameside to Broxbourne.
The trip with diesel fuel costs 24.5 £ (167p/lt, 62.7 mpg).
For 2 passengers: 12.25 £ (24.5/2) /p.
For 3 passengers: 8.17 £ (24.5/3) /p.
For 4 passengers: 6.13 £ (24.5/4) /p.
Diesel fuel and petrol fuel in terms of greater torque at lower RPM:
-
Diesel Fuel: Diesel engines typically produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic is due to the inherent design differences between diesel and petrol engines, particularly in their combustion processes and fuel properties. Diesel engines operate on compression ignition, where the air-fuel mixture ignites spontaneously under high pressure and temperature, allowing them to generate high torque even at low RPMs. This characteristic makes diesel vehicles well-suited for tasks requiring high pulling power, such as towing or hauling heavy loads, as they can deliver ample torque at low engine speeds.
-
Petrol (Gasoline): Petrol engines generally produce less torque at lower RPMs compared to diesel engines. While petrol engines can also deliver torque, they often require higher engine speeds to reach their maximum torque output. Petrol engines rely on spark ignition, where the air-fuel mixture is ignited by a spark plug, and this combustion process may not generate as much torque at lower engine speeds as compression ignition in diesel engines. However, advancements in petrol engine technology, such as turbocharging and variable valve timing, have improved torque delivery across a broader RPM range in modern petrol vehicles.
Alternative routes from Tameside to Broxbourne
The second route from Tameside to the Broxbourne is 190.89 miles and takes 3 hours and 33 minutes.
The third route from Tameside to the Broxbourne is 194.7 miles and takes 3 hours and 55 minutes.
Which is the cheapest route from Tameside to Broxbourne by car?
The cheapest route from Tameside to Broxbourne is the second suggested route (191mi, 3h 33min) and costs 33.3 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The second cheapest route from Tameside to Broxbourne is the third suggested route (195mi, 3h 55min) and costs 34 £.
The most expensive route from Tameside to Broxbourne is the first suggested route (202mi, 3h 26min) and costs 35.3 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Tameside to Broxbourne?
There are three suggested routes. The fastest route is 202mi (distance from Tameside to Broxbourne) and its duration is 3h 26min. The other route is 191mi, and its duration is 3h 33min. The slowest route is 195mi, and its duration is 3h 55min.
RouteCalculator provides you with the information to prepare your trip from Tameside to Broxbourne by car or motorbike. It offers you alternative road routes that you can follow to go from Tameside to Broxbourne. It provides driving directions from Tameside to Broxbourne, i.e. where to turn and when, distance of the Tameside - Broxbourne route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Tameside to Broxbourne with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Tameside located?
Tameside is located in Greater Manchester county and in England. It is situated at an altitude of 119 meters above sea level. Tameside has coordinates 53.4805828o,-2.0809891o. RouteCalculator provides a map of Tameside from which you can plan your trips to other UK cities.
What is the location of Broxbourne?
Broxbourne is located in Hertfordshire county and in England. It is situated at an altitude of 38 meters above sea level. Broxbourne has coordinates 51.7434730o,-0.0211510o. RouteCalculator provides a map of Broxbourne from which you can plan your trips to other UK cities.
- Route from Tameside to Broxtowe
- Distance from Tameside to Buckley
- Route from Tameside to Burnley
- Distance from Tameside to Bury
- Miles from Tameside to Caerphilly
- How far is from Tameside to Calderdale
- Route from Tameside to Cambridge
- Distance from Tameside to Cambuslang
- Distance from Tameside to Camden
