Tamworth Clydebank by car, distance and driving time

The distance between Tamworth and Clydebank by car is 297 miles. The driving time is 4 hours and 60 minutes.

How far is Clydebank from Tamworth? The driving distance is 297 miles, depending on the selected route and traffic conditions.

From: Tamworth, County: Staffordshire, England
To: Clydebank, County: West Dunbartonshire, Scotland
297 mi , 4 h 60 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Tamworth to Clydebank on map



Driving directions from Tamworth to Clydebank

297 mi 4 h 60 min
1.
Head southeast
22 ft
2.
Turn left
94 ft
3.
Turn right onto Mill Lane
298 ft
4.
Enter the roundabout and take the 2nd exit onto Anker Drive (A513)
96 ft
5.
Exit the roundabout onto Anker Drive (A513)
982 ft
6.
Enter the roundabout and take the 2nd exit onto Riverdrive (A51)
119 ft
7.
Exit the roundabout onto Riverdrive (A51)
0.5 mi
8.
Enter Jolly Sailor Roundabout and take the 1st exit
58 ft
9.
Exit the roundabout
697 ft
10.
Enter Ventura Park Road and take the 2nd exit towards A5: Nuneaton
127 ft
11.
Exit the roundabout towards A5: Nuneaton
4.8 mi
12.
Enter Weeford Island and take the 3rd exit
802 ft
13.
Exit the roundabout
422 ft
14.
Keep right at the fork
0.7 mi
15.
Merge right onto M6 Toll
80 mi
16.
Keep right onto M6
116 mi
17.
Continue onto A74(M)
48.9 mi
18.
Continue onto M74
36.7 mi
19.
Take exit 1 on the left towards Kinning Park
1187 ft
20.
Keep left towards Kinning Park
232 ft
21.
Make a slight left onto Carnoustie Street
20 ft
22.
Turn left onto Scotland Street
974 ft
23.
Continue slightly left onto West Street
663 ft
24.
Take the ramp on the left towards M8 East: City Centre
0.3 mi
25.
Continue onto Kingston Bridge
1275 ft
26.
Keep left towards A814: Clydebank
1132 ft
27.
Go straight onto Clydeside Expressway (A814)
3.1 mi
28.
Enter the roundabout and take the 2nd exit onto Dumbarton Road (A814)
59 ft
29.
Exit the roundabout onto Dumbarton Road (A814)
2 mi
30.
Continue onto Glasgow Road (A814)
1 mi
31.
Turn right onto Kilbowie Road (A8014)
480 ft
32.
Turn right onto Chalmers Street
219 ft
33.
Continue right onto Alexander Street
397 ft
34.
You have arrived at your destination, on the left
0 ft


How much does a trip from London to Brighton set you back in petrol costs?

The answer: £51.8. In this calculation, we're considering a petrol price of 144 pence per liter and a car's fuel efficiency rated at 37.5 miles per gallon. Carpooling with two passengers reduces the cost per person to £25.9 (£51.8 divided by 2). With three passengers, the expense drops to approximately £17.27 per passenger (£51.8 divided by 3), and with a full car of four, it's just £12.95 per passenger (£51.8 divided by 4).

Now, let's dissect the numbers behind this. The fuel cost is determined by the distance traveled and the car's fuel consumption rate. For this journey, you'll need approximately 36 liters of fuel. Crunching the figures, that's where the total of £51.8 comes from for the journey from Tamworth to Clydebank.
 

Diesel cost from Tamworth to Clydebank.

The trip with diesel fuel costs 35.9 £ (167p/lt, 62.7 mpg).
For 2 passengers: 17.95 £ (35.9/2) /p.
For 3 passengers: 11.97 £ (35.9/3) /p.
For 4 passengers: 8.98 £ (35.9/4) /p.

Diesel fuel and petrol (gasoline) fuel in terms of emissions:

  • Diesel Fuel: Diesel combustion generally results in higher emissions of nitrogen oxides (NOx) and particulate matter compared to petrol combustion. This is primarily due to the combustion characteristics of diesel engines and the composition of diesel fuel. However, modern diesel vehicles incorporate advanced emission control technologies such as particulate filters and selective catalytic reduction (SCR) systems to mitigate these emissions effectively.

  • Petrol (Gasoline): Petrol combustion typically leads to lower emissions of nitrogen oxides and particulate matter compared to diesel combustion. This is because petrol itself contains fewer impurities, resulting in fewer emitted particulates. Additionally, petrol engines may emit lower levels of nitrogen oxides due to differences in combustion processes and engine design.

In summary, while both diesel and petrol engines emit pollutants, diesel engines historically produced higher emissions. Nevertheless, advancements in emission control technologies have enabled both diesel and petrol vehicles to meet strict emissions standards.

Where is Tamworth located?

Tamworth is located in Staffordshire county and in England. It is situated at an altitude of 63 meters above sea level. Tamworth has coordinates 52.6335840o,-1.6910320o. RouteCalculator provides a map of Tamworth from which you can plan your trips to other UK cities.

What is the location of Clydebank?

Clydebank is located in West Dunbartonshire county and in Scotland. It is situated at an altitude of 8 meters above sea level. Clydebank has coordinates 55.9000990o,-4.4047740o. RouteCalculator provides a map of Clydebank from which you can plan your trips to other UK cities.