Route from Wellingborough to Bearsden

The distance between Wellingborough and Bearsden is 353 miles. Travel time is 5 hours and 55 minutes.

From: Wellingborough, County: Northamptonshire, England
To: Bearsden, County: East Dunbartonshire, Scotland
353 mi , 5 h 55 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Wellingborough to Bearsden on map



Driving directions from Wellingborough to Bearsden

353 mi 5 h 55 min
1.
Head northeast on Church Street (A5128)
193 ft
2.
Turn left onto Herriotts Lane
573 ft
3.
Turn left onto Havelock Street
311 ft
4.
Continue onto St Johns Street
499 ft
5.
Turn right onto High Street (A5193)
637 ft
6.
Continue right onto Harrowden Road (A5193)
1 mi
7.
Enter the roundabout and take the 2nd exit onto Kettering Road (A509)
135 ft
8.
Exit the roundabout onto Kettering Road (A509)
2 mi
9.
Continue onto Wellingborough Road (A509)
1.3 mi
10.
Enter the roundabout and take the 1st exit onto Kettering Road (A509)
236 ft
11.
Exit the roundabout onto Kettering Road (A509)
0.6 mi
12.
Enter Wicksteed Park Interchange and take the 2nd exit
148 ft
13.
Exit the roundabout
1239 ft
14.
Merge right onto A14
21.2 mi
15.
Continue onto M6
22.8 mi
16.
Keep left onto M6
14.2 mi
17.
Keep right onto M6
7.9 mi
18.
Keep right onto M6
72 mi
19.
Keep right onto M6
116 mi
20.
Continue onto A74(M)
48.9 mi
21.
Continue onto M74
36.7 mi
22.
Take exit 1 on the left towards Kinning Park
1187 ft
23.
Keep left towards Kinning Park
232 ft
24.
Make a slight left onto Carnoustie Street
20 ft
25.
Turn left onto Scotland Street
974 ft
26.
Continue slightly left onto West Street
663 ft
27.
Take the ramp on the left towards M8 East: City Centre
0.3 mi
28.
Continue onto Kingston Bridge
1275 ft
29.
Keep left towards A814: Clydebank
1132 ft
30.
Go straight onto Clydeside Expressway (A814)
2.4 mi
31.
Make a slight right
0.3 mi
32.
Go straight onto A739
2.5 mi
33.
Enter Canniesburn Toll and take the 1st exit onto Drymen Road (A809)
13 ft
34.
Exit the roundabout onto Drymen Road (A809)
0.9 mi
35.
You have arrived at your destination, on the left
0 ft


How much does it cost to drive from Wellingborough to Bearsden with petrol?

Driving from Wellingborough to Bearsden costs £61.6 with petrol. The calculation assumes a petrol price of 144 pence per liter and a car's petrol consumption of 37.5 miles per gallon. Carpooling with two passengers brings the cost down to £30.8 per person. With three passengers, it's £20.53 per person, and with four passengers, it's £15.4 per person. The fuel cost for the trip is derived from the distance and car fuel consumption, totaling 42.7 liters of fuel. This results in a £61.6 fuel cost for the journey.
 

 

The state of the road might impact fuel usage due to many factors.

Surface roughness refers to the unevenness of road surfaces, which can be caused by potholes, fractures, or uneven pavement. This unevenness can lead to an increase in rolling resistance. Consequently, the tires must exert more effort to sustain velocity, resulting in increased fuel consumption.

Friction: The presence of inadequate road conditions can augment the level of friction between the tires and the road surface. The friction between surfaces generates drag, necessitating the engine to exert more effort to overcome it. Consequently, the use of fuel might escalate, particularly when driving at higher velocities.

Traffic congestion refers to the situation where roads experience a high volume of vehicles, resulting in frequent halts, starts, and prolonged waiting in traffic lines. The consistent acceleration and deceleration can result in higher fuel usage when compared to driving on uncongested, unrestricted roadways.

Changes in elevation can have an impact on fuel usage, particularly for vehicles equipped with less powerful engines, when encountering roads with steep inclines or drops. Ascending a slope necessitates greater engine power and consequently more fuel consumption, but descending a decline may necessitate additional braking and fuel usage to maintain control.

Weather Conditions: Inclement weather conditions, including precipitation such as rain, snow, or ice, can have a detrimental impact on road grip and the stability of vehicles. Motorists may be required to modify their velocity and driving conduct, which can have an effect on fuel usage.

Surface Quality: Smooth road surfaces with high-quality pavement often lead to decreased fuel consumption in comparison to rough or inadequately maintained roads. The reason for this is that smooth roads decrease rolling resistance, hence enabling more efficient vehicle performance.

In general, the quality of roads has a substantial impact on petrololine consumption, and drivers may encounter differences in fuel economy based on the state of the roads they are traveling on.

Diesel cost from Wellingborough to Bearsden.

The trip with diesel fuel costs 42.7 £ (167p/lt, 62.7 mpg).
For 2 passengers: 21.35 £ (42.7/2) /p.
For 3 passengers: 14.23 £ (42.7/3) /p.
For 4 passengers: 10.68 £ (42.7/4) /p.

Where is Wellingborough located?

Wellingborough is located in Northamptonshire county and in England. It is situated at an altitude of 67 meters above sea level. Wellingborough has coordinates 52.3024190o,-0.6939640o. RouteCalculator provides a map of Wellingborough from which you can plan your trips to other UK cities.

What is the location of Bearsden?

Bearsden is located in East Dunbartonshire county and in Scotland. It is situated at an altitude of 61 meters above sea level. Bearsden has coordinates 55.9216900o,-4.3355250o. RouteCalculator provides a map of Bearsden from which you can plan your trips to other UK cities.