Route from Bristol to Malvern Hills

The distance between Bristol and Malvern Hills is 69 miles. Travel time is 1 hour and 17 minutes.

From: Bristol, County: Bristol, England
To: Malvern Hills, County: Worcestershire, England
69 mi , 1 h 17 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Bristol to Malvern Hills on map



Driving directions from Bristol to Malvern Hills

69 mi 1 h 17 min
1.
Head southeast on East Tucker Street
100 ft
2.
Turn left onto Saint Philip's Bridge
864 ft
3.
Take the ramp on the left onto Temple Way (A4044)
414 ft
4.
Enter Old Market Roundabout and take the 2nd exit onto Bond Street South (A4044)
167 ft
5.
Exit the roundabout onto Bond Street South (A4044)
791 ft
6.
Merge right onto Bond Street South (A4044)
493 ft
7.
Make a slight left to stay on Bond Street South (A4044)
180 ft
8.
Turn right onto Newfoundland Circus
385 ft
9.
Keep left onto Newfoundland Way (A4032)
0.3 mi
10.
Continue onto M32
4.4 mi
11.
Take the ramp on the left towards M4
719 ft
12.
Keep left towards M4
0.5 mi
13.
Merge right onto M4
1.9 mi
14.
Take exit 20 on the left towards M5: Thornbury
0.3 mi
15.
Keep right towards M5 North: The Midlands
50.7 mi
16.
Take the ramp on the left onto M5
0.3 mi
17.
Enter Crookbarrow Interchange and take the 1st exit onto Whittington Road (A44)
239 ft
18.
Exit the roundabout onto Whittington Road (A44)
1014 ft
19.
Take the ramp on the left
487 ft
20.
Merge right onto Crookbarrow Way (A4440)
0.8 mi
21.
Enter Norton Roundabout and take the 2nd exit onto Broomhall Way (A4440)
211 ft
22.
Exit the roundabout onto Broomhall Way (A4440)
0.6 mi
23.
Enter Ketch Roundabout and take the 2nd exit onto Temeside Way (A4440)
284 ft
24.
Exit the roundabout onto Temeside Way (A4440)
1.2 mi
25.
Enter Powick Roundabout and take the 2nd exit onto Hams Way (A4440)
269 ft
26.
Exit the roundabout onto Hams Way (A4440)
1.2 mi
27.
Enter the roundabout and take the 2nd exit onto A4440
260 ft
28.
Exit the roundabout onto A4440
0.6 mi
29.
Enter the roundabout and take the 1st exit onto A4103
81 ft
30.
Exit the roundabout onto A4103
2 mi
31.
Turn right
1.2 mi
32.
Continue onto Brockamin Lane
0.5 mi
33.
Turn right onto Dingle Road
231 ft
34.
Continue slightly left
1003 ft
35.
Continue straight
1194 ft
36.
Continue onto Hayley Dingle Rd.
0.3 mi
37.
You have arrived at your destination
0 ft


How much does it cost to drive from Bristol to Malvern Hills with petrol?

Driving from Bristol to Malvern Hills costs £11.9 with petrol. The calculation assumes a petrol price of 143 pence per liter and a car's petrol consumption of 37.5 miles per gallon. Carpooling with two passengers brings the cost down to £5.95 per person. With three passengers, it's £3.97 per person, and with four passengers, it's £2.98 per person. The fuel cost for the trip is derived from the distance and car fuel consumption, totaling 8.3 liters of fuel. This results in a £11.9 fuel cost for the journey.
 

 

Road conditions affect fuel usage for the following reasons:

Surface Roughness: Potholes, fissures, and uneven pavement increase rolling resistance. This makes the tires work harder to maintain speed, increasing fuel consumption.

Tire-road surface friction increases with poor road conditions. Friction causes drag, which makes the engine work harder. Therefore, fuel usage might rise, especially at high speeds.

Traffic Congestion: Heavy traffic causes stops and idling in traffic queues. Constant acceleration and deceleration might increase fuel consumption compared to open roadways.

Elevation Changes: Steep inclines or falls can effect fuel usage, especially for smaller engines. Uphill climbing takes more engine power and petrololine, whereas descending downhill may require more braking and fuel to regulate.

Rain, snow, and ice can impair road traction and vehicle stability. Adjusting speed and driving behavior can affect fuel consumption.

Good pavement and smooth roads use less fuel than rough or badly maintained roads. Smooth roads reduce rolling resistance and improve vehicle efficiency.

Road conditions greatly affect fuel use, so drivers' fuel economy may vary.

Diesel cost from Bristol to Malvern Hills.

The trip with diesel fuel costs 7.5 £ (151p/lt, 62.7 mpg).
For 2 passengers: 3.75 £ (7.5/2) /p.
For 3 passengers: 2.5 £ (7.5/3) /p.
For 4 passengers: 1.88 £ (7.5/4) /p.

Alternative routes from Bristol to Malvern Hills

The slowest route from Bristol to the Malvern Hills is 62.38 miles and takes 1 hour and 44 minutes.

Which is the cheapest route from Bristol to Malvern Hills by car?

The cheapest route from Bristol to Malvern Hills is the second suggested route (62mi, 1h 44min) and costs 10.8 £ (petrol fuel cost, 143p/lt, 37.5mpg).

The most expensive route from Bristol to Malvern Hills is the first suggested route (69mi, 1h 17min) and costs 11.9 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Bristol to Malvern Hills?

There are two suggested routes. The fastest route is 69mi (distance from Bristol to Malvern Hills) and its duration is 1h 17min. The slowest route is 62mi, and its duration is 1h 44min.

RouteCalculator provides you with the information to prepare your trip from Bristol to Malvern Hills by car or motorbike. It offers you alternative road routes that you can follow to go from Bristol to Malvern Hills. It provides driving directions from Bristol to Malvern Hills, i.e. where to turn and when, distance of the Bristol - Malvern Hills route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Bristol to Malvern Hills with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Bristol located?

Bristol is located in Bristol county and in England. It is situated at an altitude of 9 meters above sea level. Bristol has coordinates 51.4545130o,-2.5879100o. RouteCalculator provides a map of Bristol from which you can plan your trips to other UK cities.

What is the location of Malvern Hills?

Malvern Hills is located in Worcestershire county and in England. It is situated at an altitude of 26 meters above sea level. Malvern Hills has coordinates 52.1893836o,-2.3369784o. RouteCalculator provides a map of Malvern Hills from which you can plan your trips to other UK cities.