Route from Clydebank to Malvern Hills

The distance between Clydebank and Malvern Hills is 328 miles. Travel time is 5 hours and 36 minutes.

From: Clydebank, County: West Dunbartonshire, Scotland
To: Malvern Hills, County: Worcestershire, England
328 mi , 5 h 36 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Clydebank to Malvern Hills on map



Driving directions from Clydebank to Malvern Hills

328 mi 5 h 36 min
1.
Head north on Alexander Street
616 ft
2.
Turn left onto Kilbowie Road (A8014)
455 ft
3.
Turn left onto Glasgow Road (A814)
1 mi
4.
Make a slight left onto Dumbarton Road (A814)
2 mi
5.
Enter the roundabout and take the 1st exit onto A814
22 ft
6.
Exit the roundabout onto A814
3.1 mi
7.
Take the ramp on the left towards M8: Glasgow Airport
0.5 mi
8.
Merge right onto Kingston Bridge (M8)
1041 ft
9.
Take exit 20 on the left towards (A730): East Kilbride
0.3 mi
10.
Turn left towards (M8 West): East Kilbride
783 ft
11.
Make a slight left onto Dalintober Street (A8)
280 ft
12.
Take the ramp on the left towards M74: Carlisle
37 mi
13.
Continue onto A74(M)
49 mi
14.
Continue onto M6
98 mi
15.
Keep right onto Preston Bypass (M6)
86 mi
16.
Keep left onto M6
9.4 mi
17.
Keep left onto M5
30.9 mi
18.
Take the ramp on the left onto M5
0.3 mi
19.
Enter Crookbarrow Interchange and take the 3rd exit onto Whittington Road (A44)
1251 ft
20.
Exit the roundabout onto Whittington Road (A44)
1014 ft
21.
Take the ramp on the left
487 ft
22.
Merge right onto Crookbarrow Way (A4440)
0.8 mi
23.
Enter Norton Roundabout and take the 2nd exit onto Broomhall Way (A4440)
211 ft
24.
Exit the roundabout onto Broomhall Way (A4440)
0.6 mi
25.
Enter Ketch Roundabout and take the 2nd exit onto Temeside Way (A4440)
284 ft
26.
Exit the roundabout onto Temeside Way (A4440)
1.2 mi
27.
Enter Powick Roundabout and take the 2nd exit onto Hams Way (A4440)
269 ft
28.
Exit the roundabout onto Hams Way (A4440)
1.2 mi
29.
Enter the roundabout and take the 2nd exit onto A4440
260 ft
30.
Exit the roundabout onto A4440
0.6 mi
31.
Enter the roundabout and take the 1st exit onto A4103
81 ft
32.
Exit the roundabout onto A4103
2 mi
33.
Turn right
1.2 mi
34.
Continue onto Brockamin Lane
0.5 mi
35.
Turn right onto Dingle Road
231 ft
36.
Continue slightly left
1003 ft
37.
Continue straight
1194 ft
38.
Continue onto Hayley Dingle Rd.
0.3 mi
39.
You have arrived at your destination
0 ft


What's the cost of a drive from Clydebank to Malvern Hills?

The journey, powered by petrol, sets you back £57.2. In this calculation, we're crunching numbers based on a petrol price of 144 pence per liter and a car's thirst of 37.5 miles per gallon. If you're carpooling with a buddy, that's £28.6 each (£57.2 divided by 2). With a trio onboard, it drops to around £19.07 a head (£57.2 divided by 3), and with a full car of four, it's a mere £14.3 per person (£57.2 divided by 4).

Let's dig into the math behind it. The fuel expenditure hinges on the distance covered and the car's efficiency. For this particular jaunt, you're looking at guzzling down roughly 39.7 liters of fuel. Crunching the numbers, that's where the £57.2 total comes from for the trip from Clydebank to Malvern Hills.
 

 

The following reasons can affect car fuel consumption:

  1. Traffic Congestion: Driving in heavy traffic often involves frequent stops and starts, as well as idling in traffic queues. This constant acceleration and deceleration can lead to increased fuel consumption compared to driving on open, free-flowing roads.

  2. Vehicle Weight: Carrying excess weight in the vehicle, such as heavy cargo or unnecessary items, can increase fuel consumption by putting additional strain on the engine. Removing unnecessary weight can improve fuel efficiency.

  3. Elevation Changes: Driving on roads with steep inclines or declines can affect fuel consumption, especially for vehicles with less powerful engines. Climbing uphill requires more power from the engine and thus more fuel, while descending downhill may require additional braking and fuel to maintain control.

  4. Weather Conditions: Adverse weather conditions such as rain, snow, or strong winds can affect fuel consumption. These conditions may require drivers to adjust their speed and driving behavior, impacting fuel efficiency. Additionally, extreme temperatures can affect engine performance and fuel consumption.

Diesel cost from Clydebank to Malvern Hills.

The trip with diesel fuel costs 39.7 £ (167p/lt, 62.7 mpg).
For 2 passengers: 19.85 £ (39.7/2) /p.
For 3 passengers: 13.23 £ (39.7/3) /p.
For 4 passengers: 9.93 £ (39.7/4) /p.

Where is Clydebank located?

Clydebank is located in West Dunbartonshire county and in Scotland. It is situated at an altitude of 8 meters above sea level. Clydebank has coordinates 55.9000990o,-4.4047740o. RouteCalculator provides a map of Clydebank from which you can plan your trips to other UK cities.

What is the location of Malvern Hills?

Malvern Hills is located in Worcestershire county and in England. It is situated at an altitude of 26 meters above sea level. Malvern Hills has coordinates 52.1893836o,-2.3369784o. RouteCalculator provides a map of Malvern Hills from which you can plan your trips to other UK cities.