Route from Eastbourne to Richmond upon Thames

The distance between Eastbourne and Richmond upon Thames is 76 miles. Travel time is 1 hour and 42 minutes.

From: Eastbourne, County: East Sussex, England
To: Richmond upon Thames, County: Greater London, England
76 mi , 1 h 42 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Eastbourne to Richmond upon Thames on map



Driving directions from Eastbourne to Richmond upon Thames

76 mi 1 h 42 min
1.
Head northeast on Seaside (A259)
331 ft
2.
Turn left onto Cavendish Place
0.3 mi
3.
Continue onto Upper Avenue
693 ft
4.
Enter Upper Avenue Roundabout and take the 2nd exit onto The Avenue (A2040)
173 ft
5.
Exit the roundabout onto The Avenue (A2040)
250 ft
6.
Turn left onto Upper Avenue (A2040)
363 ft
7.
Turn left onto Bedfordwell Road (A2021)
277 ft
8.
Go straight onto Lewes Road (A2021)
0.4 mi
9.
Continue onto King's Drive (A2021)
0.6 mi
10.
Enter Rodmill Roundabout and take the 2nd exit onto Kings Drive (A2021)
79 ft
11.
Exit the roundabout onto Kings Drive (A2021)
118 ft
12.
Go straight onto King's Drive (A2021)
1 mi
13.
Enter Willington Roundabout and take the 3rd exit onto Willingdon Road (A2270)
343 ft
14.
Exit the roundabout onto Willingdon Road (A2270)
1236 ft
15.
Continue onto Eastbourne Road (A2270)
1.8 mi
16.
Take the ramp on the left
167 ft
17.
Merge right onto Lewes Road (A27)
3.4 mi
18.
Enter Drusillas Roundabout and take the 2nd exit onto Lewes Road (A27)
146 ft
19.
Exit the roundabout onto Lewes Road (A27)
5.5 mi
20.
Enter Beddingham Roundabout and take the 2nd exit onto A27
155 ft
21.
Exit the roundabout onto A27
1.4 mi
22.
Take the ramp on the left towards A27: London
655 ft
23.
Merge right onto Lewes Bypass (A27)
2 mi
24.
Enter Ashcombe Roundabout and take the 2nd exit onto A27
191 ft
25.
Exit the roundabout onto A27
3.1 mi
26.
Continue towards A27: Worthing
2.7 mi
27.
Take the ramp on the left towards A23: London
1085 ft
28.
Enter the roundabout and take the 1st exit onto A27
30 ft
29.
Exit the roundabout onto A27
1102 ft
30.
Enter Mill Road Roundabout and take the 3rd exit towards London
343 ft
31.
Exit the roundabout towards London
3 mi
32.
Continue onto Brighton Road (A23)
8.3 mi
33.
Continue onto London Road (A23)
1.1 mi
34.
Continue onto Brighton Road (A23)
3.4 mi
35.
Continue onto M23
2.6 mi
36.
Continue onto M23
11.3 mi
37.
Take the ramp on the left towards M25(CW)|M25(CW)|M25(ACW)|M25(ACW)
0.3 mi
38.
Keep left towards M25: Heathrow
0.5 mi
39.
Merge right onto M25
9.3 mi
40.
Take the ramp on the left towards A243: Leatherhead
1015 ft
41.
Enter the roundabout and take the 3rd exit onto A243
430 ft
42.
Exit the roundabout onto A243
1 mi
43.
Keep left onto Kingston Road (A243)
3.4 mi
44.
Enter the roundabout and take the 2nd exit onto Hook Road (A243)
127 ft
45.
Exit the roundabout onto Hook Road (A243)
0.8 mi
46.
Enter Hook Junction and take the 2nd exit onto Hook Road (A243)
224 ft
47.
Exit the roundabout onto Hook Road (A243)
0.6 mi
48.
Turn right onto Ditton Road (B3364)
0.3 mi
49.
Turn left onto Ewell Road (A240)
0.7 mi
50.
Continue onto Surbiton Hill Road (A240)
0.3 mi
51.
Continue onto Surbiton Road (A240)
1031 ft
52.
Go straight onto Penrhyn Road (A240)
0.4 mi
53.
Enter the roundabout and take the 2nd exit onto Wheatfield Way (A307)
86 ft
54.
Exit the roundabout onto Wheatfield Way (A307)
0.3 mi
55.
Continue right onto Clarence Street (A307)
621 ft
56.
Keep right onto Sopwith Way (A307)
894 ft
57.
Keep left onto Kingsgate Road (A307)
535 ft
58.
Turn left onto Richmond Road (A307)
1.2 mi
59.
Continue onto Upper Ham Road (A307)
0.3 mi
60.
Continue onto Petersham Road (A307)
1 mi
61.
Turn left to stay on Petersham Road (A307)
0.9 mi
62.
Continue onto Hill Street (A305)
583 ft
63.
Make a slight left onto King Street
470 ft
64.
Continue onto The Green
475 ft
65.
Turn right to stay on The Green
88 ft
66.
Continue slightly right onto Pembroke Villas
545 ft
67.
Continue onto Portland Terrace
951 ft
68.
You have arrived at your destination, on the right
0 ft


How much is the expense of driving from Eastbourne to Richmond upon Thames?

The expense of driving from Eastbourne to Richmond upon Thames, using petrol as the fuel source, amounts to £13.3. This calculation derives from considering the petrol price as 144 pence per liter and the car's fuel efficiency at 37.5 miles per gallon. When carpooling with two passengers, the cost of the trip per passenger is halved to £6.65 (£13.3 divided by 2). With three passengers, the expense drops to approximately £4.43 per passenger (£13.3 divided by 3), and with four passengers, it's reduced further to £3.33 per passenger (£13.3 divided by 4).

To delve into the details of the calculations, the fuel cost computation is reliant on the distance traveled and the car's fuel consumption rate. For the journey from Eastbourne to Richmond upon Thames, approximately 9.2 liters of fuel would be required. This amount is determined by dividing the distance of 76.16 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting from gallons to liters using the conversion factor of 4.54609 liters per gallon.

Multiplying the fuel needed by the petrol price per liter results in the total fuel cost of £13.3 for the trip. This breakdown illustrates the impact of various factors, such as fuel price and consumption rate, on the overall cost of the journey, providing insights for individuals planning similar trips and requiring budget estimates.
 

 

Fuel consumption in automobiles can be affected by the following factors:

In severe traffic, drivers frequently have to stop and start their vehicles multiple times, and they also have to wait in traffic lines for extended periods of time. When compared to driving on open highways with the flow of traffic, this frequent acceleration and deceleration might contribute to an increase in the amount of fuel that is consumed.

It is possible to increase fuel consumption by carrying additional weight in the vehicle, such as large goods or objects that are not necessary. This is because the engine is put under additional pressure while the vehicle is carrying excess weight. Improving fuel economy can be accomplished by removing unneeded weight.

Elevation Changes: Driving on roads that have steep inclines or drops can have an effect on fuel usage, particularly for vehicles that have engines that are not as strong. During a descent downhill, it may be necessary to use greater braking and petrololine in order to maintain control, but climbing uphill takes more power from the engine, which in turn consumes more fuel.

Weather Conditions: Unfavourable weather conditions, such as rain, snow, or strong winds, can have an impact on the amount of petrololine that is consumed. It may be necessary for drivers to modify their speed and driving behaviour in response to these conditions, which will have an effect on fuel efficiency.

Diesel cost from Eastbourne to Richmond upon Thames.

The trip with diesel fuel costs 9.2 £ (167p/lt, 62.7 mpg).
For 2 passengers: 4.6 £ (9.2/2) /p.
For 3 passengers: 3.07 £ (9.2/3) /p.
For 4 passengers: 2.3 £ (9.2/4) /p.

Alternative routes from Eastbourne to Richmond upon Thames

The second route from Eastbourne to the Richmond upon Thames is 89.96 miles and takes 1 hour and 43 minutes.

The third route from Eastbourne to the Richmond upon Thames is 76.2 miles and takes 1 hour and 50 minutes.

Which is the cheapest route from Eastbourne to Richmond upon Thames by car?

The cheapest route from Eastbourne to Richmond upon Thames is the suggested route (0ft, ) and costs £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Eastbourne to Richmond upon Thames is the suggested route (0ft, ) and costs £.

The most expensive route from Eastbourne to Richmond upon Thames is the suggested route (0ft, ) and costs £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Eastbourne to Richmond upon Thames?

There are three suggested routes. The fastest route is 76mi (distance from Eastbourne to Richmond upon Thames) and its duration is 1h 42min. The other route is 90mi, and its duration is 1h 43min. The slowest route is 76mi, and its duration is 1h 50min.

RouteCalculator provides you with the information to prepare your trip from Eastbourne to Richmond upon Thames by car or motorbike. It offers you alternative road routes that you can follow to go from Eastbourne to Richmond upon Thames. It provides driving directions from Eastbourne to Richmond upon Thames, i.e. where to turn and when, distance of the Eastbourne - Richmond upon Thames route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Eastbourne to Richmond upon Thames with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Eastbourne located?

Eastbourne is located in East Sussex county and in England. It is situated at an altitude of 10 meters above sea level. Eastbourne has coordinates 50.7680350o,0.2904720o. RouteCalculator provides a map of Eastbourne from which you can plan your trips to other UK cities.

What is the location of Richmond upon Thames?

Richmond upon Thames is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Richmond upon Thames has coordinates 51.4613110o,-0.3037420o. RouteCalculator provides a map of Richmond upon Thames from which you can plan your trips to other UK cities.