Route from Gateshead to Redcar and Cleveland
The distance between Gateshead and Redcar and Cleveland is 49.5 miles. Travel time is 54 minutes.
To: Redcar and Cleveland, County: North Yorkshire, EnglandDriving directions from Gateshead to Redcar and Cleveland
What's the cost of a drive from Gateshead to Redcar and Cleveland?
The journey, powered by petrol, sets you back £8.6. In this calculation, we're crunching numbers based on a petrol price of 143 pence per liter and a car's thirst of 37.5 miles per gallon. If you're carpooling with a buddy, that's £4.3 each (£8.6 divided by 2). With a trio onboard, it drops to around £2.87 a head (£8.6 divided by 3), and with a full car of four, it's a mere £2.15 per person (£8.6 divided by 4).
Let's dig into the math behind it. The fuel expenditure hinges on the distance covered and the car's efficiency. For this particular jaunt, you're looking at guzzling down roughly 6 liters of fuel. Crunching the numbers, that's where the £8.6 total comes from for the trip from Gateshead to Redcar and Cleveland.
Diesel cost from Gateshead to Redcar and Cleveland.
The trip with diesel fuel costs 5.4 £ (151p/lt, 62.7 mpg).
For 2 passengers: 2.7 £ (5.4/2) /p.
For 3 passengers: 1.8 £ (5.4/3) /p.
For 4 passengers: 1.35 £ (5.4/4) /p.
Diesel fuel and gasoline (petrol) fuel have differences:
-
Compression Ignition vs. Spark Ignition: Diesel engines operate on compression ignition, where the fuel-air mixture ignites spontaneously due to high pressure and temperature, while petrol engines rely on spark ignition from spark plugs. This fundamental difference in combustion processes leads to different engine designs and performance characteristics.
-
Fuel Efficiency: Diesel engines tend to be more fuel-efficient than petrol engines, primarily due to their higher compression ratios and thermal efficiency. Diesel engines can extract more energy from each unit of fuel compared to petrol engines, resulting in better fuel economy and lower fuel consumption.
Where is Gateshead located?
Gateshead is located in Tyne and Wear county and in England. It is situated at an altitude of 81 meters above sea level. Gateshead has coordinates 54.9526800o,-1.6034110o. RouteCalculator provides a map of Gateshead from which you can plan your trips to other UK cities.
What is the location of Redcar and Cleveland?
Redcar and Cleveland is located in North Yorkshire county and in England. It is situated at an altitude of 13 meters above sea level. Redcar and Cleveland has coordinates 54.5971344o,-1.0775997o. RouteCalculator provides a map of Redcar and Cleveland from which you can plan your trips to other UK cities.
- Route from Gateshead to Redditch
- Distance from Gateshead to Reigate and Banstead
- Route from Gateshead to Renfrew
- Distance from Gateshead to Rhyl
- Miles from Gateshead to Ribble Valley
- How far is from Gateshead to Richmond upon Thames
- Route from Gateshead to Richmondshire
- Distance from Gateshead to Rochdale
- Distance from Gateshead to Rochford
