Lancaster Redcar and Cleveland by car, distance and driving time
The distance between Lancaster and Redcar and Cleveland by car is 94 miles. The driving time is 2 hours and 5 minutes.
How far is Redcar and Cleveland from Lancaster? The driving distance is 94 miles, depending on the selected route and traffic conditions.
To: Redcar and Cleveland, County: North Yorkshire, EnglandDriving directions from Lancaster to Redcar and Cleveland
What's the expense of traveling from Lancaster to Redcar and Cleveland by car?
Embarking on the journey from Lancaster to Redcar and Cleveland, one might ponder the cost of such a venture. Indeed, the expenditure amounts to 16.4 pounds when fueled by petrol. In this calculation, we delve into the intricate details, where the price of petrol stands at 144 pence per liter, and the car's thirst for fuel measures 37.5 miles per gallon.
For those opting for carpooling, the financial burden lightens, with a cost of 8.2 pounds for each of two passengers, 5.47 pounds for three passengers, and merely 4.1 pounds for four passengers.
Delving deeper into the mechanics of the calculation, we ascertain the amount of fuel required for the voyage. Covering a distance of approximately 93.82 miles, the car craves around 11.4 liters of petrol. This value is derived from the division of the distance by the car's fuel consumption rate, converted into liters for precision.
With the quantity of fuel determined, we proceed to compute the total expenditure. By multiplying the fuel volume (11.4 liters) by the price per liter (144 pence), we seamlessly arrive at the grand total of 16.4 pounds. Thus, the journey from Lancaster to Redcar and Cleveland is marked by a fuel cost of 16.4 pounds.
Diesel cost from Lancaster to Redcar and Cleveland.
The trip with diesel fuel costs 11.4 £ (167p/lt, 62.7 mpg).
For 2 passengers: 5.7 £ (11.4/2) /p.
For 3 passengers: 3.8 £ (11.4/3) /p.
For 4 passengers: 2.85 £ (11.4/4) /p.
Significant factors contributing to diesel cars generally having lower fuel consumption than petrol cars are:
-
Higher Thermal Efficiency: Diesel engines typically operate at higher compression ratios than petrol engines. This higher compression ratio allows diesel engines to extract more energy from each unit of fuel, resulting in greater thermal efficiency. As a result, diesel vehicles can achieve better fuel economy compared to petrol vehicles.
-
More Torque at Lower RPM: Diesel engines tend to produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic enables diesel vehicles to perform more efficiently during steady-state driving conditions, requiring less throttle input to maintain speed. Consequently, diesel cars often exhibit lower fuel consumption, especially in highway driving scenarios.
Alternative routes from Lancaster to Redcar and Cleveland
The second route from Lancaster to the Redcar and Cleveland is 112.86 miles and takes 2 hours and 14 minutes.
Which is the cheapest route from Lancaster to Redcar and Cleveland by car?
The cheapest route from Lancaster to Redcar and Cleveland is the first suggested route (94mi, 2h 5min) and costs 16.4 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The most expensive route from Lancaster to Redcar and Cleveland is the second suggested route (113mi, 2h 14min) and costs 19.7 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Lancaster to Redcar and Cleveland?
There are two suggested routes. The fastest route is 94mi (distance from Lancaster to Redcar and Cleveland) and its duration is 2h 5min. The slowest route is 113mi, and its duration is 2h 14min.
RouteCalculator provides you with the information to prepare your trip from Lancaster to Redcar and Cleveland by car or motorbike. It offers you alternative road routes that you can follow to go from Lancaster to Redcar and Cleveland. It provides driving directions from Lancaster to Redcar and Cleveland, i.e. where to turn and when, distance of the Lancaster - Redcar and Cleveland route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Lancaster to Redcar and Cleveland with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Lancaster located?
Lancaster is located in Lancashire county and in England. It is situated at an altitude of 24 meters above sea level. Lancaster has coordinates 54.0465750o,-2.8007399o. RouteCalculator provides a map of Lancaster from which you can plan your trips to other UK cities.
What is the location of Redcar and Cleveland?
Redcar and Cleveland is located in North Yorkshire county and in England. It is situated at an altitude of 13 meters above sea level. Redcar and Cleveland has coordinates 54.5971344o,-1.0775997o. RouteCalculator provides a map of Redcar and Cleveland from which you can plan your trips to other UK cities.
- Route from Lancaster to Redditch
- Distance from Lancaster to Reigate and Banstead
- Route from Lancaster to Renfrew
- Distance from Lancaster to Rhyl
- Miles from Lancaster to Ribble Valley
- How far is from Lancaster to Richmond upon Thames
- Route from Lancaster to Richmondshire
- Distance from Lancaster to Rochdale
- Distance from Lancaster to Rochford
