Route from Melton to Barking and Dagenham
The distance between Melton and Barking and Dagenham is 128 miles. Travel time is 2 hours and 14 minutes.
To: Barking and Dagenham, County: Greater London, EnglandDriving directions from Melton to Barking and Dagenham
How much is the expense of driving from Melton to Barking and Dagenham?
The expense of driving from Melton to Barking and Dagenham, using petrol as the fuel source, amounts to £22.1. This calculation derives from considering the petrol price as 143 pence per liter and the car's fuel efficiency at 37.5 miles per gallon. When carpooling with two passengers, the cost of the trip per passenger is halved to £11.05 (£22.1 divided by 2). With three passengers, the expense drops to approximately £7.37 per passenger (£22.1 divided by 3), and with four passengers, it's reduced further to £5.53 per passenger (£22.1 divided by 4).
To delve into the details of the calculations, the fuel cost computation is reliant on the distance traveled and the car's fuel consumption rate. For the journey from Melton to Barking and Dagenham, approximately 15.5 liters of fuel would be required. This amount is determined by dividing the distance of 127.69 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting from gallons to liters using the conversion factor of 4.54609 liters per gallon.
Multiplying the fuel needed by the petrol price per liter results in the total fuel cost of £22.1 for the trip. This breakdown illustrates the impact of various factors, such as fuel price and consumption rate, on the overall cost of the journey, providing insights for individuals planning similar trips and requiring budget estimates.
Diesel cost from Melton to Barking and Dagenham.
The trip with diesel fuel costs 14 £ (151p/lt, 62.7 mpg).
For 2 passengers: 7 £ (14/2) /p.
For 3 passengers: 4.67 £ (14/3) /p.
For 4 passengers: 3.5 £ (14/4) /p.
Diesel fuel has more torque at lower RPM than petrol fuel.
Diesel Fuel: Diesel engines create higher torque at lower RPM than petrol engines. Due to diesel and petrol engine design variances in combustion processes and fuel characteristics, this occurs. Diesel engines create significant torque at low RPMs due to compression ignition, when the air-fuel mixture spontaneously ignites under high pressure and temperature. Diesel cars can deliver enough of torque at low engine speeds, making them ideal for towing and transporting heavy objects.
Compared to diesel engines, petrol engines provide less torque at lower RPMs. Petrol engines can produce torque, but they need greater engine speeds. A spark plug ignites the air-fuel mixture in petrol engines, which may not provide as much torque at lower engine speeds as compression ignition in diesel engines. Modern petrol automobiles have enhanced torque delivery across a wider RPM range because to turbocharging and variable valve timing.
Overall, diesel engines have more torque at lower RPMs than petrol engines due to their combustion processes and engine designs. Diesel cars excel for high-pull and low-speed applications due to this trait.
Alternative routes from Melton to Barking and Dagenham
The second route from Melton to the Barking and Dagenham is 136.92 miles and takes 2 hours and 29 minutes.
The third route from Melton to the Barking and Dagenham is 131.78 miles and takes 2 hours and 38 minutes.
Which is the cheapest route from Melton to Barking and Dagenham by car?
The cheapest route from Melton to Barking and Dagenham is the first suggested route (128mi, 2h 14min) and costs 22.1 £ (petrol fuel cost, 143p/lt, 37.5mpg).
The second cheapest route from Melton to Barking and Dagenham is the third suggested route (132mi, 2h 38min) and costs 22.9 £.
The most expensive route from Melton to Barking and Dagenham is the second suggested route (137mi, 2h 29min) and costs 23.7 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Melton to Barking and Dagenham?
There are three suggested routes. The fastest route is 128mi (distance from Melton to Barking and Dagenham) and its duration is 2h 14min. The other route is 137mi, and its duration is 2h 29min. The slowest route is 132mi, and its duration is 2h 38min.
RouteCalculator provides you with the information to prepare your trip from Melton to Barking and Dagenham by car or motorbike. It offers you alternative road routes that you can follow to go from Melton to Barking and Dagenham. It provides driving directions from Melton to Barking and Dagenham, i.e. where to turn and when, distance of the Melton - Barking and Dagenham route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Melton to Barking and Dagenham with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Melton located?
Melton is located in Leicestershire county and in England. It is situated at an altitude of 133 meters above sea level. Melton has coordinates 52.8282784o,-0.8432685o. RouteCalculator provides a map of Melton from which you can plan your trips to other UK cities.
What is the location of Barking and Dagenham?
Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.
- Route from Melton to Barnet
- Distance from Melton to Barnsley
- Route from Melton to Barrow-in-Furness
- Distance from Melton to Barry
- Miles from Melton to Basildon
- How far is from Melton to Basingstoke and Deane
- Route from Melton to Bassetlaw
- Distance from Melton to Bath and North East Somerset
- Distance from Melton to Bathgate