Route from Selby to Malvern Hills

The distance between Selby and Malvern Hills is 158 miles. Travel time is 2 hours and 44 minutes.

From: Selby, County: North Yorkshire, England
To: Malvern Hills, County: Worcestershire, England
158 mi , 2 h 44 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Selby to Malvern Hills on map



Driving directions from Selby to Malvern Hills

158 mi 2 h 44 min
1.
Head west on The Crescent (A19)
594 ft
2.
Continue onto Gowthorpe (A19)
871 ft
3.
Make a slight left onto Brook Street (A19)
0.3 mi
4.
Continue onto Doncaster Road (A19)
1.5 mi
5.
Enter the roundabout and take the 2nd exit onto Doncaster Road (A19)
336 ft
6.
Exit the roundabout onto Doncaster Road (A19)
4.4 mi
7.
Enter the roundabout and take the 2nd exit onto A19
96 ft
8.
Exit the roundabout onto A19
0.9 mi
9.
Enter Whitley Bridge Interchange and take the 2nd exit onto M62
724 ft
10.
Exit the roundabout onto M62
4.2 mi
11.
Take the ramp on the left
0.4 mi
12.
Enter Ferrybridge Interchange and take the 1st exit towards A1: The SOUTH
28 ft
13.
Exit the roundabout towards A1: The SOUTH
0.3 mi
14.
Merge right onto A162
8.8 mi
15.
Continue onto Doncaster By-pass (A1(M))
7.1 mi
16.
Take the ramp on the left towards M18: Sheffield(M1)
0.3 mi
17.
Enter Wadworth Interchange and take the 3rd exit towards M18: Sheffield
0.3 mi
18.
Exit the roundabout towards M18: Sheffield
0.4 mi
19.
Merge right onto M18
50.6 mi
20.
Take the ramp on the left towards A42 (M42): The South West
0.5 mi
21.
Merge left onto A42
14.1 mi
22.
Continue onto M42
15.9 mi
23.
Keep right onto M42
1069 ft
24.
Take the ramp on the left
669 ft
25.
Merge left onto M42
12.5 mi
26.
Keep right onto M42
10.5 mi
27.
Keep right onto M5
0.6 mi
28.
Keep right onto M5
13.7 mi
29.
Take the ramp on the left onto M5
0.3 mi
30.
Enter Crookbarrow Interchange and take the 3rd exit onto Whittington Road (A44)
1251 ft
31.
Exit the roundabout onto Whittington Road (A44)
1014 ft
32.
Take the ramp on the left
487 ft
33.
Merge right onto Crookbarrow Way (A4440)
0.8 mi
34.
Enter Norton Roundabout and take the 2nd exit onto Broomhall Way (A4440)
211 ft
35.
Exit the roundabout onto Broomhall Way (A4440)
0.6 mi
36.
Enter Ketch Roundabout and take the 2nd exit onto Temeside Way (A4440)
284 ft
37.
Exit the roundabout onto Temeside Way (A4440)
1.2 mi
38.
Enter Powick Roundabout and take the 2nd exit onto Hams Way (A4440)
269 ft
39.
Exit the roundabout onto Hams Way (A4440)
1.2 mi
40.
Enter the roundabout and take the 2nd exit onto A4440
260 ft
41.
Exit the roundabout onto A4440
0.6 mi
42.
Enter the roundabout and take the 1st exit onto A4103
81 ft
43.
Exit the roundabout onto A4103
2 mi
44.
Turn right
1.2 mi
45.
Continue onto Brockamin Lane
0.5 mi
46.
Turn right onto Dingle Road
231 ft
47.
Continue slightly left
1003 ft
48.
Continue straight
1194 ft
49.
Continue onto Hayley Dingle Rd.
0.3 mi
50.
You have arrived at your destination
0 ft


How much does it cost to drive from Selby to Malvern Hills with petrol?

Let's delve into the expenses of a road trip from Selby to Malvern Hills. The journey using petrol will set you back 27.6 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 13.8 pounds (£27.6 divided by 2). With three passengers, the cost per person drops to around 9.2 pounds (£27.6 divided by 3). And if there are four passengers onboard, each person chips in 6.9 pounds (£27.6 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Selby and Malvern Hills is approximately 157.86 miles. So, to cover this distance, the car will require roughly 19.1 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (19.1 liters) by the price per liter (144 pence) yields 27.6 pounds. Therefore, the fuel cost for the journey from Selby to Malvern Hills is 27.6 pounds.
 

Diesel cost from Selby to Malvern Hills.

The trip with diesel fuel costs 19.1 £ (167p/lt, 62.7 mpg).
For 2 passengers: 9.55 £ (19.1/2) /p.
For 3 passengers: 6.37 £ (19.1/3) /p.
For 4 passengers: 4.78 £ (19.1/4) /p.

One key factor contributing to diesel cars generally having lower fuel consumption than petrol cars is their higher thermal efficiency. Diesel engines typically operate at higher compression ratios than petrol engines, allowing them to extract more energy from each unit of fuel. This increased efficiency means diesel vehicles can travel farther on the same amount of fuel compared to petrol vehicles, resulting in lower fuel consumption overall.

Alternative routes from Selby to Malvern Hills

The second route from Selby to the Malvern Hills is 187.84 miles and takes 3 hours and 13 minutes.

The third route from Selby to the Malvern Hills is 154.28 miles and takes 3 hours and 23 minutes.

Which is the cheapest route from Selby to Malvern Hills by car?

The cheapest route from Selby to Malvern Hills is the third suggested route (154mi, 3h 23min) and costs 26.9 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Selby to Malvern Hills is the first suggested route (158mi, 2h 44min) and costs 27.6 £.

The most expensive route from Selby to Malvern Hills is the second suggested route (188mi, 3h 13min) and costs 32.8 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Selby to Malvern Hills?

There are three suggested routes. The fastest route is 158mi (distance from Selby to Malvern Hills) and its duration is 2h 44min. The other route is 188mi, and its duration is 3h 13min. The slowest route is 154mi, and its duration is 3h 23min.

RouteCalculator provides you with the information to prepare your trip from Selby to Malvern Hills by car or motorbike. It offers you alternative road routes that you can follow to go from Selby to Malvern Hills. It provides driving directions from Selby to Malvern Hills, i.e. where to turn and when, distance of the Selby - Malvern Hills route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Selby to Malvern Hills with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Selby located?

Selby is located in North Yorkshire county and in England. It is situated at an altitude of 10 meters above sea level. Selby has coordinates 53.7835240o,-1.0671890o. RouteCalculator provides a map of Selby from which you can plan your trips to other UK cities.

What is the location of Malvern Hills?

Malvern Hills is located in Worcestershire county and in England. It is situated at an altitude of 26 meters above sea level. Malvern Hills has coordinates 52.1893836o,-2.3369784o. RouteCalculator provides a map of Malvern Hills from which you can plan your trips to other UK cities.