Route from Southend-on-Sea to Barking and Dagenham

The distance between Southend-on-Sea and Barking and Dagenham is 32 miles. Travel time is 42 minutes.

From: Southend-on-Sea, County: Essex, England
To: Barking and Dagenham, County: Greater London, England
32 mi , 42 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Southend-on-Sea to Barking and Dagenham on map



Driving directions from Southend-on-Sea to Barking and Dagenham

32 mi 42 min
1.
Head east on Carnarvon Road
219 ft
2.
Turn left onto Tunbridge Road
958 ft
3.
Turn right onto Tickfield Avenue
375 ft
4.
Turn left onto Penhurst Avenue
265 ft
5.
Turn left onto East Street (B1015)
867 ft
6.
Turn right onto Victoria Avenue (A127)
0.6 mi
7.
Enter Cuckoo Corner and take the 1st exit onto Prince Avenue (A127)
42 ft
8.
Exit the roundabout onto Prince Avenue (A127)
0.9 mi
9.
Take the ramp on the left onto A127
0.7 mi
10.
Continue onto Southend Arterial Road (A127)
4.5 mi
11.
Take the ramp on the left onto A127
1030 ft
12.
Enter Fairglen Interchange and take the 1st exit onto Canvey Way (A1245)
46 ft
13.
Exit the roundabout onto Canvey Way (A1245)
0.3 mi
14.
Take the ramp on the left onto Canvey Way (A1245)
4.7 mi
15.
Continue onto A13
17.1 mi
16.
Take the ramp on the left towards A1306: Dagenham
1172 ft
17.
Turn left onto Goresbrook Interchange
10 ft
18.
Turn right to stay on Goresbrook Interchange
647 ft
19.
Go straight onto Ripple Road (A1306)
0.3 mi
20.
Turn left onto Heathway (A1240)
0.8 mi
21.
Turn left onto Parsloes Avenue
0.8 mi
22.
Turn left onto Haskard Road
532 ft
23.
Turn left onto Wren Road
946 ft
24.
You have arrived at your destination, on the left
0 ft


How much does it cost to drive from Southend-on-Sea to Barking and Dagenham with petrol?

Let's delve into the expenses of a road trip from Southend-on-Sea to Barking and Dagenham. The journey using petrol will set you back 5.6 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 2.8 pounds (£5.6 divided by 2). With three passengers, the cost per person drops to around 1.87 pounds (£5.6 divided by 3). And if there are four passengers onboard, each person chips in 1.4 pounds (£5.6 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Southend-on-Sea and Barking and Dagenham is approximately 32.01 miles. So, to cover this distance, the car will require roughly 3.9 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (3.9 liters) by the price per liter (144 pence) yields 5.6 pounds. Therefore, the fuel cost for the journey from Southend-on-Sea to Barking and Dagenham is 5.6 pounds.
 

Diesel cost from Southend-on-Sea to Barking and Dagenham.

The trip with diesel fuel costs 3.9 £ (167p/lt, 62.7 mpg).
For 2 passengers: 1.95 £ (3.9/2) /p.
For 3 passengers: 1.3 £ (3.9/3) /p.
For 4 passengers: 0.98 £ (3.9/4) /p.

Alternative routes from Southend-on-Sea to Barking and Dagenham

An alternative route from Southend-on-Sea to the Barking and Dagenham is 29.87 miles and takes 43 minutes.

Which is the cheapest route from Southend-on-Sea to Barking and Dagenham by car?

The cheapest route from Southend-on-Sea to Barking and Dagenham is the second suggested route (29.9mi, 43min) and costs 5.2 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Southend-on-Sea to Barking and Dagenham is the first suggested route (32mi, 42min) and costs 5.6 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Southend-on-Sea to Barking and Dagenham?

There are two suggested routes. The fastest route is 32mi (distance from Southend-on-Sea to Barking and Dagenham) and its duration is 42min. The slowest route is 29.9mi, and its duration is 43min.

RouteCalculator provides you with the information to prepare your trip from Southend-on-Sea to Barking and Dagenham by car or motorbike. It offers you alternative road routes that you can follow to go from Southend-on-Sea to Barking and Dagenham. It provides driving directions from Southend-on-Sea to Barking and Dagenham, i.e. where to turn and when, distance of the Southend-on-Sea - Barking and Dagenham route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Southend-on-Sea to Barking and Dagenham with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Southend-on-Sea located?

Southend-on-Sea is located in Essex county and in England. It is situated at an altitude of 29 meters above sea level. Southend-on-Sea has coordinates 51.5459269o,0.7077123o. RouteCalculator provides a map of Southend-on-Sea from which you can plan your trips to other UK cities.

What is the location of Barking and Dagenham?

Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.